Lab Use Heating and Mixing Ceramic Magnetic Stirrer Hotplate

Basic Info.

Model NO.	SH-II-4C
Type	Hot Plate
Temperature Range	Rt-380 Degree C
Max Temp.	380 Degree C
Accuracy of Temp Control	+-1 Degree C
Heating Power	600W
Packing Dimensions	390X240X230mm
Weight	6000g
Overall Dimensions	320X190X125mm
Sensor	PT100
Heating Plate	Ceramic Coated
Heating Plate Size	190X190mm
Motor Power	20W
Speed Adjust Range	200-2000r/Min Digital Display
Name of Commodity	Magnetic Stirring Hot Plate
Max. Volume	5000ml
Model	Sh-II-4c
Transport Package	Plywood Box
Specification	550x380x200mm
Trademark	WollenLab
Origin	China
HS Code	8479820090
Production Capacity	1000sets/Month

Product Description

Lab Use Heating and Mixing Ceramic Magnetic Stirrer Hotplate
Features:
1. Stretched shell and cover prevent leaking.2. Heating and stirring can proceed simultaneously.Ceramic Magnetic Stirring Hot Plate with the following functions:SH-4C
1. Setting temperature precisely, stepless adjustable stirring speed .2. Large LCD display, temperature and rotate speed can be displayed simultaneously.3. Double sensors: outer PT100 temperature sensor to control liquid temperature precisely, inner K model sensor to control hot plate temperature.
SH-II-4C
1. Setting temperature and stirring speed precisely,. With speed switch to start or stop stirring at any time.2. With timing function (0~9999mins), the time can be set according to customer's requirements, with sound and light alarm function.3. Double sensors: outer PT100 temperature sensor to control liquid temperature precisely, inner K model sensor to control hot plate temperature.4. One key to shift inside and outside sensor easily and precisely.5. Large screen LCD display can indicate temperature, rotational speed and timing at the same time.Technical Parameters:

Model		SH-4A	SH-4B	SH-4	SH-4C	SH-II-4C
Mode		Heating	Stirring	Heating+ Stirring	Digital+Heating+Stirring
Function	Max. Volume	5000ml
	Stirring Speed	No	200~2000rpm
	Working Time	Continuous
	Mini Stirring Speed	No	200rpm
	Max Temp.	380ºC	No	380ºC
Structure	Exterior	Iron plate welding, surface spraying
	Heating Plate	Ceramic Coated
	Driving Mode	No	Motor
	Motor Power	No	20W
	Heating Power	600W	No	600W
	Stirrer	No	PTFE
Controller	ContinuousOperation	Yes
	Setting Mode	Scale			Digital
	Speed DisplayMode	Scale			Digital	Digital
	Timer	No				Yes
	Operation Function	No				Yes
	Sensor	No			PT100	PT100
Specification	Exterior Size	320x190x125mm
	Packing Size	390x240x230mm
	Plate Size	190x190mm
	Plate Load	10kg
	Power Supply	110V or 220V 50/60Hz
	NW/GW	5/6kg

Precautions: 1. Do not use dry boil.2. Please do not connect the ground wire to ensure safe use.3. In order to extend the using of the product, all magnetic stirring motors are equipped with fan of heat dissipation function, so when you doing heating experiments, especially high temperature heating tests, the instrument cannot be used for heating alone. Be sure to adjust the motor to rotating or middle Speed rotation state (or idling) to prevent the motor and electrical appliances from being damaged by high temperature radiation. If the motor cannot start to rotate, contact for maintenance in time.4. When the high-temperature heating is finished, please turn off the heating first, wait a few minutes for the residual temperature to dissipate, and then turn off the stirring.5. The heating part has a high temperature, so be careful when working to avoid burns.6. If there are wet hands, liquid spills, or long-term exposure to excessive humidity, the leakage phenomenon should be dried in time or dried naturally before use to avoid danger.7. When it don't use for a long time, please store it in a dry place without corrosive gas.8. When the ambient humidity is relatively high, induction electricity may be transmitted to the shell through the insulation layer. Please connect the ground wire to avoid leakage and pay attention to ventilation.9. Relative humidity: 35%-85% (no condensation).

Our Services: